|
Robert Erickson's personal tips and help guide for the Handyman
Welcome to My HandymanPage!
This page is my attempt to gather information, links, etc for all who are interested in home improvement. Please feel free to e-mail me at: roberterickson7@hotmail.com with NEW articles, links etc. Check back with this site often as I will update it as often as I can. Enjoy the web site!
Home Improvement - TOUGH STAINS - FIBERGLASS CLEANING PROBLEMS
Fiberglass Cleaning Problems
Stubborn stains: rub one of cleaners recommended by
manufacturer for regular cleaning on stained area; leave
on about an hour; rinse.
Heavy soap scum buildup: occasionally use a mild
abrasive, such as "Bon Ami" or "Bartenders Friend" or
"Soft Scrub"; do not use them for regular cleaning.
Hard water or mineral deposits: occasionally remove
with products specifically designed to remove such
deposits that state on label they are safe for fiberglass;
these are usually mild acids such as "Lime-Away" which
contains some phosphoric acid but is safe for consumer
use; rubber gloves should be worn with applying, and label
instructions followed exactly.
Tough stains such as tar, adhesives, oil paints, etc:
moisten clean cloth with a solvent such as acetone (nail-
polish remover) or paint thinner and rub stained area
lightly until stain disappears; use minimum amount needed.
Do not let solvent go down drain or tough any plastic
items. Wipe off with clean cloth dampened in water. Be
very careful using solvent; do not use around heat or
flame, do not smoke, keep container capped, have plenty of
ventilation.
From
Extension bulletin, Maintaining Your Home: Care of Bathtub
Enclosures.
|
